Best Neck Fan — Factory Direct Supply. MistAirHome Shenzhen Manufacturer.
Customer Service Hotline:
+8613261677119
Best Neck Fan — Factory Direct Supply. MistAirHome Shenzhen Manufacturer.+8613261677119
TL;DR - The Mistairhome WL-PBS03C (PLUS) is a 40 mm full-range driver with a neodymium motor and a sealed rear chamber driven by a Class D output stage with a voltage rail held flat as the pack drains, rated 8.5 W with a 18 W peak and producing 85.5 dB at 1 m across 86 Hz to 20 kHz; the pack is 1800 mAh lithium polymer giving 9.1 hours at half volume against 62 minutes at maximum volume, recharging in 2.3 hours from empty over USB-C 5V/1.5A behind a sealed flap; it runs on Bluetooth 5.3, LE Audio ready out to 25 m open field with SBC and AAC and Two units pair into a left and right channel, carries IP67 on an ABS shell inside a silicone bumper with a stainless carabiner, weighs 254 g and measures 10.2 x 8.4 x 4.6 cm including the carabiner eye, and ships documented to CE / RoHS / FCC standards for import into Japan. MOQ is 200 units per SKU with a 25-35 days lead time, FOB Shenzhen or EXW Longgang, covered by a 18 months.
China Wanlin supplies the Outdoor Portable Speaker category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common driver family, a common cell supplier and a common accessory line, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
Full specification of WL-PBS03C-PLUS:
| Driver complement | 40 mm full-range driver with a neodymium motor and a sealed rear chamber |
| Amplifier | Class D output stage with a voltage rail held flat as the pack drains |
| Rated output, RMS | 8.5 W |
| Peak output | 18 W |
| Sound pressure level | 85.5 dB at 1 m |
| Frequency response | 86 Hz to 20 kHz |
| Passive radiator | One side-firing passive radiator tuned to 90 Hz |
| Bluetooth version | 5.3, LE Audio ready |
| Wireless range | 25 m open field |
| Supported codecs | SBC and AAC |
| TWS pairing | Two units pair into a left and right channel |
| Hands-free calling | Built-in microphone with echo reduction and wind screening |
| Battery pack | 1800 mAh lithium polymer |
| Play time at half volume | 9.1 hours at half volume |
| Play time at maximum volume | 62 minutes at maximum volume |
| Charge time | 2.3 hours from empty |
| Charge input | USB-C 5V/1.5A behind a sealed flap |
| Power bank output | Not fitted |
| Ingress protection rating | IP67 |
| Control interface | Three large keys sized for gloved hands |
| Enclosure | ABS shell inside a silicone bumper with a stainless carabiner |
| Protection | Overcharge, over-discharge, short circuit, thermal shutdown and a sealed-port detect that stops charging while wet |
| Dimensions | 10.2 x 8.4 x 4.6 cm including the carabiner eye |
| Weight | 254 g |
| Warranty | 18 months |
Shipping configuration: Plus build, + hard carry case + spare grille + gift box + accessory pouch. Master carton holds 36 units. Stated lead time is 25-35 days from order confirmation and deposit. Accessories and spare grilles are repeat line items and are ordered separately from the appliance.
A second demand stream in Japan has nothing to do with music: the same chassis is bought for hands-free calls, for commentary on tours, and for speech in rooms where a phone speaker cannot be heard, which is a replacement purchase rather than a seasonal one. The gift and promotion channel sits alongside retail and quietly accounts for a large share of pocket-sized units, because the form factor fits a corporate mailing and the buyer is not an audio enthusiast at all.
For the Outdoor Portable Speaker segment the deciding specification is usually run time first, output second and weight third, the reverse of how many first-time buyers rank them, because the complaint that follows a sale is almost always about the battery or the bulk rather than the sound. This is why the table above states both a half-volume and a maximum-volume run figure: a buyer comparing two SKUs needs to see the pack capacity against the draw at each level, because that pair predicts return rates better than any other pair.
Wanlin serves Japan through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and battery files listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category.
Tuning for this size of enclosure starts from use rather than from a target curve copied off a larger product. A pocket speaker is mostly listened to off-axis, at a few metres, over traffic or conversation, and what makes it work in that situation is a slight lift through the vocal band and a controlled top end rather than a flat measurement in an anechoic room. The result measures less impressively on a graph than a bass-heavy competitor and is easier to listen to for an evening, which is the trade we make deliberately.
Stereo pairing is a firmware problem disguised as a feature. Two units have to share a clock well enough that the image does not wander, they have to survive one of them being carried out of range and back, and they have to do it while drawing power from two packs at different states of charge. The link holds to roughly 40 to 80 milliseconds of latency depending on the codec in use, which is inaudible for music and visible for video, so we tell buyers which of the two they are buying.
The codec matters more for current draw than most buyers expect. SBC is cheap to run and adequate in a noisy environment; AAC is the default on the largest phone platform and costs little; higher-rate codecs push more data through the radio and shorten the run time by a measurable amount over a long session. The set supported is listed on the table so a buyer can match it to the handsets their market actually uses instead of paying for compatibility with none.
Consistency is the part that is hardest to buy and easiest to check. Drivers are grouped by measured resonance and sensitivity before assembly so a pair of matched units sits within about 1.5 dB of each other, and firmware is locked per model code so a reorder behaves like the sample the buyer approved. A distributor who reorders twice a year is depending on that more than on any single specification.
On the WL-PBS03C shown here that resolves to SBC and AAC support over Bluetooth 5.3, LE Audio ready, a 40 mm full-range driver with a neodymium motor and a sealed rear chamber matched within a tight tolerance, and 9.1 hours at half volume against 62 minutes at maximum volume depending on the step chosen.
Operating requirement: Music over a compressor is a volume problem the room makes worse.
How the WL-PBS03C answers it: Placement low and close to the bench instead of one loud unit across the room, a grille that can be vacuumed rather than wiped, and a sealed port because solvent mist and dust find everything. On the WL-PBS03C configuration shown above that requirement is met by 9.1 hours at half volume between charges, IP67 on the enclosure, Two units pair into a left and right channel where two units are needed, and a 10.2 x 8.4 x 4.6 cm including the carabiner eye shell at 254 g that can be carried or clipped rather than placed. The figures quoted here come from the same specification set shown in the table above, so the numbers in this scenario and that table cannot disagree.
Deployment: mining services company issuing speakers to remote site crews
Timing: 2025
Remote sites have no mains power in the crib room and long shifts, so the specification was run time and a sealed port against iron-rich dust. Forty units went to three sites, and the company's own review found the sealed port as important as the battery because the previous units had died of dust in the connector.
Deployment: municipal summer programme running outdoor activities in 34 neighbourhood parks
Timing: July and August 2025
The tender specified IP rating, a lockable keypad so a child could not change the volume, and a stated run time long enough for a two-hour session plus setup. Thirty-four units went out across 34 parks and came back with two cracked bumpers and no electrical failures, and the programme reordered on the same specification in 2026.
Deployment: contractor supplying welfare audio to a labour accommodation site
Timing: 2025
The requirement came from the site welfare officer rather than a buyer: a shared unit in a common room with a volume ceiling and a shut-off time. Fourteen units were supplied across two buildings, and the shutdown timer was set locally rather than at the factory.
Across these deployments the pattern is consistent. Buyers who specify from measurements rather than superlatives end up with fewer returns, and the two measurements that matter are run time at the volume customers actually listen at, and whether the enclosure and the port survive the environment the unit is taken into. Everything else, including how a unit looks in photographs, affects the first order only.
The same chassis family is specified into four quite different duties, and the differences are worth stating plainly because they decide which model a buyer should stock rather than which one photographs best.
| Scenario | Setting | Operating requirement |
| SC08-WORKSHOP | Bicycle workshop with a compressor cycling and parts washers running | Music over a compressor is a volume problem the room makes worse. |
| SC02-BOAT | Small hire boat with no fixed power and salt spray over the console | Salt film dries on every surface and there is no socket to run from. |
| SC06-DORM | Shared study room after lights out, two people on different schedules | One of the two is asleep and the other is still working. |
| SC10-STALL | Market stall under a canvas roof with a card reader and a queue | The vendor handles stock, change and food, and cannot manage a phone as well. |
Two consequences follow for a distributor. First, a range built around one driver family and three SKU builds covers more duty than a range built around three unrelated models, because the accessory and charging line is shared. Second, the accessory is where the margin sits after the first season: carabiners, mount plates, carry cases and replacement cells repeat, while the speaker itself does not.
What the WL-PBS03C contributes in each case is 85.5 dB at 1 m at one metre where speech has to carry, 9.1 hours at half volume between charges, and IP67 on a shell that gets rinsed rather than repaired.
Working direct with the manufacturer changes three things that a buyer can verify, and one that they cannot. The verifiable ones are the bill of materials, the test reports and the model-code-specific certificates, all of which name the exact unit being shipped rather than a family. The fourth is continuity: when a distributor reorders in eighteen months, the same cell supplier, the same driver and the same housing are available, which is what allows a range to be extended rather than restarted.
The practical difference shows up in three places. Sampling is faster because the specification exists rather than being reverse-engineered from a competitor's unit. Customisation is cheaper because the change is limited to the shell and the packaging rather than to the electronics. And failure analysis is possible, because when a unit comes back from a market the factory can identify which batch, which cell lot and which firmware it came from, which is the only way a recurring problem ever gets closed.
What factory-direct does not do is remove the buyer's own obligations. The importer is still the one who declares the product, who holds the local representative where one is required, and who answers for the listing. The manufacturer's job is to make those steps possible with documentation that withstands being read by someone whose job is to reject it.
Concretely, an order for the WL-PBS03C is quoted against a 1800 mAh lithium polymer pack, a 36-unit master carton and a 25-35 days window, and those three items are what make a reorder predictable a season later.
Documentation is not one list, it is a mapping between a model code and a destination, and the mapping is where most delays happen. Europe wants the radio and EMC reports behind the CE declaration plus substance declarations and the take-back registration the local authority asks for. North America wants the FCC equipment authorisation for the radio section and the warning format the retailer insists on. Japan wants PSE on the cell and charger with the radio registration behind it, Korea wants KC, and Australia and New Zealand want RCM with a local holder named on the record.
Independently of the radio, the cell is regulated as dangerous goods. Watt-hours per unit, the number of cells per carton, the lithium mark on the outside of the box and a declaration that matches the consignment are all checked before a booking is accepted, and a mismatch costs more time than a missing certificate because it is discovered at the airport rather than at the factory. We prepare those at production rather than at booking.
Printed material is the third leg and the one most often overlooked: the model code, the rating label, the origin, the disposal symbol and the manual language all have to agree with the file set for Japan. A buyer who sends artwork for approval before production gets a carton that clears; a buyer who approves only the unit often discovers the discrepancy when the container is already on the water.
For Japan that set means the radio and EMC reports held against WL-PBS03C, the IP67 enclosure as declared, and the 1800 mAh lithium polymer listed with its cell reports rather than described in prose.
Three numbers decide whether this category works for a distributor: the carton quantity, the production window and the accessory attach rate. The carton holds 36 units, which sets both the freight calculation and the warehouse handling cost; production is 25-35 days from confirmation and deposit; and the accessory line, quoted separately, is where the second-year margin comes from because the speaker itself is bought once and the parts around it are bought repeatedly.
The trial order is worth describing exactly. 500 units on one model code and 350 on another give enough depth to see whether either sells, and 800 across accessories is enough to test whether the margin hypothesis holds. That structure also produces a real answer on packaging, because the carton quantity of 36 is only a number until somebody has unpacked it in a warehouse.
What should not be in the first order is a custom colour. It turns a one-week sample into a three-week one and adds a premium to the unit, and it commits a buyer to a decision they cannot yet justify with sales data. Run the standard housing first, confirm the model, then brand it on the reorder, when the artwork is being applied to a product the market has already accepted.
For the WL-PBS03C the arithmetic is short: 36 units to a carton, 25-35 days to build, and 9.1 hours at half volume between charges, which is the specification a customer notices first.
A single SKU starts at 200 pieces on a standard build, and at 300 pieces where the housing colour, the artwork or the manual language is being changed. A mixed container is allowed provided every model code inside it clears its own minimum, which is how most first orders are actually placed: one or two models at depth and a third at a test quantity. The WL-PBS03C ships 36 units to a master carton, so a 200-unit first line is a small number of cartons to receive and check.
The figure is pack watt-hours multiplied by a conversion efficiency, divided by the current measured on the bench at the stated level, and both the pack capacity and the conversion figure are printed on the table above so the arithmetic can be checked. A buyer with a USB power meter and a timer will land within a few percent of the published number, and where they do not, the discrepancy is usually a firmware setting rather than a cell. The WL-PBS03C figures are 9.1 hours at half volume and 62 minutes at maximum volume.
Output and current are not proportional in a small enclosure. Reaching the ceiling takes several times the current of comfortable listening, and the amplifier has to hold the rail up while doing it, so the run time collapses far faster than a linear reading of the two numbers would suggest. Publishing only the half-volume figure is how the category creates complaints, so we publish the pair.
Air is routine for samples and for urgent top-ups, and possible for volume at a cost. The cell needs a UN38.3 report, an IEC 62133 report and an MSDS, the carton needs the lithium mark and the watt-hour figure, and the booking has to be made against a declaration that matches the model code. We issue all of that with the order rather than when the forwarder asks.
Each destination has its own set, and we issue them against the model code rather than the family. Europe takes the CE technical file with radio and EMC reports plus RoHS and REACH declarations; North America adds FCC for the radio; Japan is PSE with the radio registration; Korea is KC; Australia and New Zealand are RCM. The battery set travels with every one of them because the cell is regulated independently of the radio, and consignments into Japan name WL-PBS03C throughout.
Private label is the normal arrangement rather than the exception. The change is confined to the housing colour, the logo, the artwork and the printed material, so no new tooling is needed on this range and the extra minimum is small. Where a buyer wants a different accessory kit or a different retail format, that is quoted as a packaging line rather than as a product change.
It covers water in the test sense: fresh, still, shallow and short. It does not cover a jet, chlorinated water, salt left to dry on the grille, or months of sun on a housing, and all four happen to portable speakers. We say so before the sale because the fix is behavioural, removable mounting and a rinse at the end of the day, and because a listing that promises more than the rating delivers is a returns problem later. The IP67 figure on the WL-PBS03C should be quoted with those limits.
Existing specification samples leave in about a week, custom colour in two to three weeks, and production runs three to five weeks from confirmation and deposit. The proforma states a number of days rather than a range, and the battery paperwork is prepared during production rather than at the end of it, which is what keeps the booking from slipping.
This programme suits four kinds of buyer in Japan, and it is honest to say who it does not suit. It suits an importer building a range who needs model-specific documentation and continuity across seasons. It suits a distributor with existing retail coverage who needs a shelf-extending category rather than a new one. It suits a brand owner who wants their own housing colour, artwork and manuals without paying for a new mould. And it suits a cross-border seller who needs small first orders, marketplace-ready packaging and FBA prep.
It suits less well a buyer whose only criterion is the lowest unit price on a single order, because the documentation, the cell sourcing and the test reports that make the difference are costs before they are benefits, and a unit built to a price rather than to a specification will not carry them. That is a legitimate choice for some channels. It is simply not what this programme is for.
The common thread among the buyers who stay is that they test before they commit. They order samples, they run the unit at the volume their customers will use, they drop it once on purpose, and they read the battery documents before booking freight rather than after. Those four steps take three weeks and they replace most of the disputes that otherwise arrive later.
For a buyer starting on the WL-PBS03C in Japan, that means a 36-unit carton, a 25-35 days window and a file set already written against the destination, which is the part that usually decides whether the first container clears.
The sequence from enquiry to shipment can be written as a calendar rather than as a process. Day one is an enquiry naming the model code and the destination, and day two brings back the specification sheet, the certificate list for that market and a landed estimate. Samples leave within the week on an existing build. Weeks two and three belong to the buyer: run time at their own volume, output against whatever they sell now, and a deliberate drop.
Week four is the proforma, which fixes the model codes, the SKU suffixes, the quantities and the production window as a number of days. Production then runs to that number, and the cell reports, the freight declaration and the carton marks are prepared during it rather than after. Booking follows immediately, which is where a week is usually lost in this category by everybody else.
Wanlin supplies pocket bluetooth speaker, mini speaker, portable speaker, wearable clip speaker, car speaker, desktop speaker, rugged outdoor speaker, power bank speaker lines as the source manufacturer and is appointing partners in distribution, retail and online channels across Japan and elsewhere. Private label, marketplace prep, custom packaging and mixed containers are supported, and the minimum quantities are set so that a first order tests the market without betting on it.
For a WL-PBS03C order the enquiry that moves fastest states the quantity, the destination and the SKU suffix, and the answer comes back as a 25-35 days window with the IP67 and 1800 mAh lithium polymer details already written in.
Three checks separate a good first order from an expensive lesson, and none needs specialist equipment. Run the sample at the volume your market actually listens at and time it. Put it next to whatever you sell today and listen to speech rather than to music, because a pocket speaker is bought for company more often than for fidelity. Then read the cell reports and check that the model code on them matches the one on your proforma.
Do those three things and most of what remains is commercial: which models to stock, how deep to go, and whether to brand on the second order. Skip them and the answers arrive later, in the form of returns and a conversation with a freight forwarder.
China Wanlin is the source manufacturer for the range on this page and is appointing local partners worldwide. Enquiries naming a model code, a destination and a quantity are answered with samples, the certificate set and a landed estimate. Contact: Email Mistairhome@163.com | Export line +8613261677119 | https://www.mistairhome.com.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 24, 2026
Data sources: in-house factory testing + driver and cell specifications + certification and battery files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
